Hoodies & Sweatshirts · OEM & ODM
A hoodie is more than its graphic. Start with the body shape, fabric feel and hood construction, then build the branding around them.
Pricing and bulk production timing are confirmed per order.
Your project at a glance
Share the style, materials, quantities and finishing details.
Record the agreed specification and any changes before approval.
Include your destination and target arrival date in the brief.
The design, considered
Explore one hoodie from sketch to finished concept. Look closer at the fabric, artwork placement and finishing details that shape your brief.
The design notes below describe the details to include in your brief.
The design notes below describe the details to include in your brief.
Define the weight and inside feel.
Confirm with a fabric swatch.
Set the size and position.
Review the finish on a sample.
Specify the rib width and fit.
Check against your measurements.
Drag the divider or use the arrow keys. Home shows the finished concept. End shows the full sketch.
AI-generated design comparison, not a production sample.
01 / Design directions
Four starting points for a hoodie or sweatshirt brief. These are design directions, not ready-stock products. Your reference and approved sample define the final garment.
AI design concept
01 / Hoodies & Sweatshirts
A familiar starting point for everyday collections and graphic-led ranges.
Define in your briefRegular or boxy body / hood depth / kangaroo pocket
Discuss this direction
AI design concept
02 / Hoodies & Sweatshirts
An opening front changes the look, pocket layout and artwork placement.
Define in your briefZip type / front alignment / split pockets
Discuss this direction
AI design concept
03 / Hoodies & Sweatshirts
A broad body and dropped shoulder create a relaxed silhouette.
Define in your briefShoulder drop / sleeve volume / body-to-rib balance
Discuss this direction
AI design concept
04 / Hoodies & Sweatshirts
A clean neckline gives a simple base for tonal branding or print.
Define in your briefNeck rib / sleeve shape / hem recovery
Discuss this direction02 / Material decisions
A fabric name is a starting point, not a full specification. Bring the desired look and feel; review the actual material before committing to the garment.
| Direction | What it changes | What to confirm |
|---|---|---|
| Brushed fleece | A softer, warmer-feeling inner surface. | Check brushing, pilling and handfeel after washing. |
| French terry | A loop-back option for a less bulky inner feel. | Compare loop texture, drape and weight on swatches. |
| Rib trim | Connects the body, cuffs and neckline visually. | Approve stretch, recovery and color match with the body fabric. |
Confirm composition, weight, color, care and any required supporting documents as part of your material brief.
Compare the inside feel, drape and sample checks in our brushed fleece vs French terry comparison.
Look closer
Use these independent design references to explain shape, construction and finishing. They are AI-generated concepts; your brief and approved sample define the final garment.
Define hood depth, lining and seam finish in your brief.
Discuss hood shape, shoulder line and body proportions.
Define the opening, pocket layout and artwork placement.
A close view of the body-to-rib seam for finish discussions.
Specify collar height, zip length, rib depth, and sleeve finish.
Use this detail to discuss the seam line and its meeting point at the neckline.
Specify the insert shape, size and position in relation to the neck rib.
03 / Before sampling
Use these checkpoints to turn an image into a clearer development brief.
Send your referencesMark chest width, body length, shoulder drop and sleeve length on one reference.
Review hood depth, hood layers and pocket opening before artwork placement.
Agree measurement tolerances and a wash-check method; compare body and rib after care.
Review artwork size, placement, backing and handfeel on the intended fabric.
04 / Finishing
A short, relevant selection for this category. Suitability depends on your material and artwork and should be checked on a sample.
05 / Sample review
Start with the intended layers and fit. Record the body and sleeve measurements, hood shape, fabric direction, rib and decoration in one brief. Review the actual sample for movement, seam bulk and the relationship between body fabric and rib. Agree the care conditions before comparing measurements or surface appearance after washing. Keep each correction tied to a sample ID and specification version; confirm the approved reference and open points in writing.
If a cuff becomes loose during use, record hand passage, wrist fit and return after sleeve positioning with our hoodie cuff review.
Reference, measurements, materials, quantity and target date.
Marked-up photos, measurements and one consolidated change list.
Agreed fit, fabric, finishing and any required checks before bulk.
Labels, size ratios, carton requirements and delivery details.
Ask about relevant sample photos and order-specific documentation. The design visuals on this page are AI-generated and must not be used as evidence of factory output, performance or certification.
Ask about sample references ↗Brief and sample notes
Use what you know and leave undecided details open. Copy or download your notes when you are ready.
This worksheet does not send an inquiry or save your entries to our server. Keep a copy before leaving this page.
This technique has been added to your brief. Edit the requirements below; suitability still needs review on your actual fabric and artwork.
Use the same brief when comparing quotes so materials, finishing and delivery assumptions stay comparable.
Record what was specified, what you observed and what needs another check. These are your working notes, not a test report or an automatic approval.
Before bulk production, agree which sample and specification version form the final approval reference, including the intended materials and finishing.
Continue to the inquiry form with all filled quotation and sample notes. The transfer is available in this browser tab for one hour; review and send the form yourself.
06 / Quote questions
Send a reference garment or a front-and-back sketch with chest, length, shoulder and sleeve measurements. A label such as oversized does not define a repeatable fit.
Compare actual swatches for inner feel, drape and weight. Brushing, composition and finishing matter alongside GSM; approve the choice together with the intended fit.
Pricing and bulk production timing are confirmed in your order-specific quote after reviewing the style, fabric availability, decoration and quantity.
Yes. Send a sketch or reference image with the measurements and details you already know. Identify what is still undecided so the next sample-development steps can be discussed.
Send the total quantity and your proposed breakdown by style, colour and size. The feasible split and any conditions are reviewed for your project and confirmed in the written quote.
Compare the same specification version, materials, decoration, labels, packaging and quantity breakdown. Ask which sample, testing, inspection and freight costs are included or separate, and confirm the destination, quote validity and production timing in writing.
Plan the next step
Explore the range
Your next collection
Send sketches, reference images or a tech pack, plus your quantity and target date. We can then discuss the next development step.
Or email [email protected]
